The production of precast concrete parts from carbon concrete is usually carried out with formwork lying on steel tables. In the lamination process, the carbon reinforcement is inserted into the fresh concrete and then covered with more fresh concrete. Alternatively, the component is concreted with flowable concrete in one step using the casting process. The carbon reinforcement is usually secured in position via the formwork. Vertical concreting of high carbon concrete components using the casting process is rarely carried out. BT has now combined non-metallic reinforcement with production in the battery mould: The concreting of plate-shaped prefabricated parts made of carbon concrete was carried out in the 2.4 m high formwork of a battery using the casting process. In the compartments of the battery, the formwork for steel tables could be used with appropriate adaptations. This made it possible to produce components from carbon concrete in the high moulds using the casting process.